This review is featured in the latest podcast from The HT Guys
Pioneer Elite Pro-950HD 42" Elite Kuro Plasma TV (MSRP $3200, Street $2500)
We recently did a review of the Pioneer Elite PRO-150FD 60" Plasma TV back in November so when Pioneer offered us the 42 inch model we weren't sure that we wanted to review a TV that was so similar. Since the TV was 720p we decided that it was different enough to warrant a review. For this review it was setup in Ara's Master Bedroom and calibrated the same as the 60 inch we reviewed back in November. Then it was dialed in for the room. We are including the calibration settings at the end of the review. The TV had a DirecTV connection without OTA. Some critical viewing was also done with a Blu Ray player.
The TV measures 40-15/16" (~104 CM) x 26-3/4" (~68CM) x 4-1/2" (11.5 cm) (WxHxD) and weighs 66.9 pounds (30.3 kg). As far as looks go it is as stunning as it's 60 inch cousin. The bezel is smaller on the sides as compared to the 60 inch model. The speakers on this model are on the bottom of the screen. Like all the plasmas in this years line the panel is very black. Be prepared to do a lot of dusting.
Movies played back smooth and had an amazing amount of detail, even in dark scenes. The TV did a great job with the night scope scenes of Blackhawk down. It was easy to see the detail that other TVs miss. Standard Definition looked very good (well as good as SD can). It was the best looking SD on a HD set we have seen. While watching SD the TV can auto size the picture so the black bars are removed or it can change the black bars to gray. This is done to prevent burn in. Regardless of what plasma manufacturers say, we see burn in all the time. Not so much from gaming but more from people watch mostly 4:3 content. With that said, by taking proper precaution you should be able to game and watch TV without burn-in issues. Just be careful.
About the only issue we have with the panel is the resolution. Since the TV has 1024 horizontal pixels the TV must scale all incoming images. But this is an issue with many 42 inch 720p plasmas. You still see everything its just that some resolution is lost.
Odds and Ends:
Calibration Settings (Use only as a starting point. Your results will vary):
Posted by The HT Guys, December 18, 2007 7:30 AM
About The HT GuysThe HT Guys, Ara Derderian and Braden Russell, are Engineers who formerly worked for the Advanced Digital Systems Group (ADSG) of Sony Pictures Entertainment. ADSG was the R&D unit of the sound department producing products for movie theaters and movie studios.
Two of the products they worked on include the DCP-1000 and DADR-5000. The DCP is a digital cinema processor used in movie theaters around the world. The DADR-5000 is a disk-based audio dubber used on Hollywood sound stages.
ADSG was awarded a Technical Academy Award by the Academy of Motion Picture Arts and Sciences in 2000 for the development of the DADR-5000. Ara holds three patents for his development work in Digital Cinema and Digital Audio Recording.
Every week they put together a podcast about High Definition TV and Home Theater. Each episode brings news from the A/V world, helpful product reviews and insights and help in demystifying and simplifying HDTV and home theater.